Tile & Grout

cleaning and sealing

Beacon Carpet Cleaning, Inc. is Orange County’s Tile and Grout, Quarry Tile,
Pavers, Brick, Terracotta Tile and Saltillo Tile Cleaning Specialist

Ceramic tile is one of the most abused and overlooked floor and wall surfaces in the home simply because of the care involved in cleaning it. No one is anxious to relive the terrible memories of scrubbing each tile and grout line for hours with a small brush and of using those irritating, harsh, and unsafe chemicals. Most of us would rather rearrange our sock drawer.

The good news is Beacon Carpet Cleaning, Inc. can make short work of this task, using only earth-safe products that won’t harm your family, your pets, or this world that we share.

Beacon Carpet Cleaning, Inc. skillfully accomplishes the proper cleaning of your ceramic tile.  Whether your tile is in your kitchen, bathroom, or some other area of your home, those stubborn stains, embedded bacteria, and germs don’t stand a chance. Your tile and grout will look very much as it did the day it was installed.

At Beacon Carpet Cleaning, Inc. we are dedicated to helping you keep your home healthy, clean, and always looking its best. The solution to difficult ceramic tile and grout cleaning is just a phone call away.

Trust Beacon Carpet Cleaning, Inc. for all those difficult and unpopular projects.  You really will be glad you did.

Ceramic Tile & Grout Cleaning Process

Step 1:  Pre-Inspection
Technicians will make note of all challenging areas and set your expectations as well as come up with a solution for each area.

Step 2:  Area Preparation
We will prepare the areas surrounding the tile, making sure not to disturb any carpeted or hardwood floors. At this point all furniture that will be cleaned under is moved prior to the cleaning.

Step 3:  Dry soil removal
Our technicians thoroughly sweep and vacuum the entire area which will maximize the results we obtain. As in any cleaning process, dry soil removal is the most important.

Step 4:  Soil Suspension
We use the highest quality products. The cleaning agent sprayed over the entire surface of your tile is the most scientifically advanced tile cleaner on the market.

Step 5:  Cleaning
Complex and difficult areas are agitated manually with a brush and for really challenging heavy use areas, a mechanical rotating brush is employed. The entire floor is then cleaned using a state of the art self-contained pressure cleaning system.

Step 6.  Rinsing
A rinse solution is pumped through the machine during cleaning, this sanitizes and balances the pH of your floor.

Step 7:  Sealing/Finishing
The type of sealer and application varies on what surface it is being applied to.

Step 8:  Post-inspection
Technicians will initiate a walk through and go over results before leaving.

General cleaners not specifically formulated for natural stone or tile are never recommended. These can breakdown the sealer, thereby removing its protective properties and making the stone and tile grout susceptible to stains. Worse yet, many cleaning products, including those that contain lemon, vinegar, bleach or ammonia can etch away the polish, discolor the surface, or even scratch your stone. Many cleaners have what is called a chelating agent in them. This agent breaks down and dissolves minerals in hard water. Since all stone is made up of minerals, these types of cleaners will dissolve and cause streaks over prolonged use. 


Beacon  ML Logo Block Short.png




Please click here to see a list of various types of natural stone and tile that is available to the consumer.  Included is an image of each type of stone along with a description of that type of stone.